爺仟利遍匈紗秘辺茄譜葎遍匈利嫋擬砂
方鷹永芝云返字父饂MP3MP4GPS
啣周岬塀字利大捲暦匂麼医CPU啣徒
一巷誘唹嬉咫勧寔
社窮窮篇唹垪腎距
嗄老利嗄汽字強只
廿概仟概杭概編杓
和墮駁強坿鷹
僥垪蝕窟譜柴
深編巷暦埀互深深冩
匍順札選利宥佚冥沫
何蛍CCIE深編膚式械喘凋綜
http://www.21tx.com 2005定07埖29晩

貧匯匈 1 2


  
  *passive-interface        Suppress Routing Updates on an Interface
  
  ***redistribute        Redistribute Information from Another Routing Protocol
  
  *router-id        Router-id for this OSPF Process
  
  ***summary-address    Configure IP Address Summaries
  
  *timers            Adjust Routing Timers
  
  Rtr(config-router)#area
  
  <0-4294967295>    OSPF Area ID as a Decimal Value
  
  A.B.C.D    OSPF Area ID in IP Address Format
  
  Rtr(config-router)#area 1
  
  **Authentication    Enable Authentication
  
  *default-cost        Set the Summary Default-cost of a NSSA/stub Area
  
  *nssa            Specify a NSSA Area
  
  ***range            Summarize Routes Matching Address/mask
  
  (Border Routers Only)
  
  *stub                Specify a Stub Area
  
  ***virtual-link        Define a Virtual Link and its Parameters
  
  Rtr(config-router)#default-information originate
  
  Always    Always Advertise Default Route
  
  metric        OSPF Default Metric
  
  metric-type    OSPF Metric Type for Default Routes
  
  route-map    Route-map Reference
  
  <cr>
  
  Rtr(config-if)#ip ospf
  
  ***authentication-key    Authentication Password (Key)
  
  **cost    Interface Cost
  
  *database-filter        Filter OSPF LSA During Synchronization and Flooding
  
  *dead-interval        Interval After Which a Neighbor is Declared Dead
  
  ***demand-circuit        OSPF Demand Circuit
  
  *hello-interval        Time Between HELLO Packets
  
  ***message-digest-key    Message Digest Authentication Password (Key)
  
  ***network            Network Type
  
  ***priority            Router Priority
  
  *retransmit-interval    Time Between Retransmitting Lost Link State Advertisements
  
  *transmit-delay        Link State Transmit Delay
  
  3550 Spanning Tree
  
  *forward-time Set the forward delay for the spanning tree
  
  * hello-time    Set the hello interval for the spanning tree
  
  * max-age     Set the max age interval for the spanning tree
  
  *** priority    Set the bridge priority for the spanning tree
  
  ***root        Configure switch as root
  
  **backbonefast Enable BackboneFast Feature
  
  **etherchannel Spanning tree etherchannel specific configuration
  
  *extend    Spanning Tree 802.1t extensions
  
  ***pathcost   Spanning tree pathcost options
  
  ***portfast   Spanning tree portfast options
  
  **uplinkfast  Enable UplinkFast Feature
  
  ATM PVC Configuration Example
  
  interface atm2/0
  
  encapsulation aal5snap
  
  ip address 192.192.192.1 255.255.255.0
  
  pvc 0/106
  
  protocols ip 192.192.192.2 broadcast
  
  interface atm2/0
  
  encapsulation aal5snap
  
  ip address 192.192.192.2 255.255.255.0
  
  pvc 0/106
  
  protocols ip 192.192.192.1 broadcast
  
  End-Station Configuration Example
  
  interface ATM3/0
  
  no ip address
  
  pvc 0/5 qsaal
  
  pvc 0/16 ilmi
  
  !
  
  !
  
  interface ATM3/0.1 multipoint
  
  ip address 1.1.1.1 255.255.255.0
  
  atm esi-address 777777777777.00
  
  atm arp-server nsap self
  
  or
  
  atm arp-server nsap 47.009181000000001007386901.555555555555.00
  
  ATM Feature Example
  
  hostname RtrA
  
  !
  
  interface ATM3/0.1 point-to-point
  
  ip address 1.1.1.1 255.255.255.0
  
  pvc 0/108
  
  class-vc vclass
  
  protocol ip 1.1.1.2
  
  encapsulation aal5snap
  
  !
  
  vc-class atm vclass
  
  abr 1000 0
  
  VOIP
  
  dial-type {dtmf | pulse}!tone or pulse dialing
  
  cptone country!set regional tone, ring and cadence
  
  ring frequency {25 | 50}!(FXS only) ring frequency in hertz;
  
  Should match end device
  
  ring number number!(FXO only) maximum number of rings to be detected before answering a call over an FXO voice port
  
  connection plar number!private line auto ring down, auto-dials
  
  remote number
  
  music-threshold decibels (-70 to -30)!specify the threshold for
  
  on-hold music
  
  description string!to include a description of what this voice port
  
  is connected to
  
  comfort-noise!generates background noise(optional, w/ VAD)
  
  num-exp extension extension-string!define how to expand
  
  an extension number into a particular destination pattern
  
  ip precedence {0|1|2|3|4|5|6|7}!gives voice traffic precedence
  
  over other IP traffic
  
  Dial Peer Configuration Example
  
  dial-peer voice 1 pots
  
  destination-pattern 1001
  
  port 1/0/0dial-peer voice 2 voip
  
  destination-pattern 1002
  
  session target ipv4:10.18.0.1
  
  DLSw+ Ethernet Configuration Example
  
  Router A#
  
  dlsw local-peer peer-id 10.1.1.2
  
  dlsw remote-peer 0 tcp 10.2.2.1
  
  dlsw bridge-group 1
  
  !
  
  interface Ethernet 0
  
  bridge-group 1
  
  !
  
  bridge 1 protocol ieee
  
  QoS Quality of Service
  
  Policy Based Routing
  
  Committed Access Rate
  
  Weighted Fair Queuing
  
  Class Based Weithted Fair Queuing
  
  Priority Queuing
  
  Custom Queuing
  
  Frame-relay Traffic Shaping
  
  Weighted Random Early Detection
  
  IP Features
  
  Network Address Translation (NAT)
  
  Hot Standby Routing Protocol (HSRP)
  
  Domain Name Service (DNS)
  
  Dynamic Host Control Protocol (DHCP)
  
  Network Time Protocol (NTP)
  
  HTTP

貧匯鐙 Cisco析弗僕公侭嗤NP僥楼宀議秀咏
和匯鐙 房親MPLS塘崔縮殻

貧匯匈 1 2

購噐厘断 | 選狼厘断 | 紗秘厘断 | 鴻御捲暦 | 誘盆吭需 | 利嫋擬砂
Copyright © 2000-2011 21tx.com, All Rights Reserved.
蛙仟親室 井幡侭嗤 Created by TXSite.net